+44 (0) 2380 667 486
sales@technic.co.uk

Precision Machinery

Items 1 to 10 of 107 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 11
  • Surpass X900 & Surpass X1200

      

    • Ultra-space testing platform
    • Best choice for communication back panel
    View Product
  • Back-Light Inspector BG11

      

    Used to observe and analyse the compactness of the copper that plates the holes in a PCB cross-section.

    View Product
  • Hole Checker JK3200

       

    ASIDA-JK3200 Inspection Hole Machine is used to inspect completed PCBs for drill hole defects. The number and quality of drilled holes is checked and the board is assigned to be either OK or NG, the resulting PCBs are sorted accordingly.

    View Product
  • Line Width Tester XK23/XK22/XK13

       

    Used to measure the widths of inner and outer range of semi PCBs after etching (before solder masking). In addition, the distance between two lines, distance between holes and edge, and the diameters of holes and arcs can also be measured. Expanding usage; measure widths of IC wafer, thickness of films and LCD boards.

    View Product
  • Long-arm Board Thickness Measurement CB11

       

    For precision measurement of copper clad laminate, the thickness of PCB and other boards. Digital display to three decimal places. equipped with foot switch to initiate the process.

    View Product
  • Automatic Video Measuring Instrument WY2200/WY2100

       

    ASIDA appearance tester (ASIDA WY) products using a continuous variable Jiao Qi times the tube, the process of clear with no zoom flash. Clear light source illuminates the surface despite the reflectivity of the material. Used with semiconductors, printed circuits, hardware and other areas of microscopic observation and detection.

    View Product
  • X-ray Inspection Machine XG3000

       

    Detect and measure positioning holes on the PCB to check deviation between layers. A variety of measurements can be programmed such as the distance from the centre of one circle to another, point to point distance and circle area.

    View Product
  • Hole AOI DQA-650

       

    Specially drilled holes for precision hole drilling process and analysis of multi-functional quality testing as one of the high-precision analysis machine.

    View Product
  • Hole Checker HCF-2400

       

    For check hole vias in printed circuit boards.

    View Product
  • X-Ray Inspection X-TAR-H

       

    X-Ray optical inspection machine is used for the inner line pcb drilling and lamination processes, directly to the pcb inner lines, pads and other inner states.

    View Product

Items 1 to 10 of 107 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 11