+44 (0) 2380 667 486
sales@technic.co.uk

Roller Brushes

Parts Store

4 Item(s)

per page

  • Lipprite® SCR Super Cut Finishing Roller

    Removing residual copper "nodules" after plating (surface preparation prior to lamination)

    After the panel plating process there may be copper "nodules" sticking to the surface. LIPRITE® Super Cut Roller will reduce nodules to a minimum and smooth the gritty appearance.

    View Product
  • Lipprite® HFR High Resolution Finishing Roller

    With finer circuitry, the dry film lamination process has become very common. Dry film must adhere perfectly to the copper surface of the laminate to ensure that there is neither contact failure nor under-etching during the subsequent etching process.

    View Product
  • Lipprite® PCR Pressplate Cleaning Roller

    Will remove resin that has become attached to the surface of the plates after pressing laminate or multi-layers. In the course of this process, the original surface roughness must remain unchanged.

    View Product
  • Lipprite® SFR Soldermask Finishing Roller

    Solder resist is applied by screen printing or through a photolithography method. It serves as insulation to protect the surface of circuitry and prevent deterioration or solder bridging. In this process, scrubbing must not be allowed to damage circuitry nor cause micro bridges.

    View Product

4 Item(s)

per page